The Recording, Mixing and Mastering the Music

Mixing & Recording

Audio mastering is an important phase that comes at the end of audio mixing & recording. First comes the Recording, the stage where the music is played by musicians who should be well rehearsed and know the material to perform from within. The sound engineer will adjust the microphone positions and route the signals through his mixing & recording console to the inputs of his digital audio workstation.

He will check that the levels are correct so that the sounds do not distort and the overall sound of the instruments sounds to the ear. Once happy, the sound engineer will push the record and instruct the band to play. Once all the music has been recorded, the files will be backed up until the time for mixing the audio has arrived.


The mixing of audio tracks either requires an analog mixing console or they can be mixed digitally in a software application known as a digital audio workstation. However, the process is quite similar, although there are a few differences. For an analog console, the equalizer is on board. This allows the sound engineer to shape the sounds using the mixer channels. The eq while working works digitally within the software itself, often referred to as “plug-ins”.

The sound engineer will balance the sound sources of the faders and add effects such as chorus, delay, and reverb to achieve a pleasant balance. Once all the tracks are well balanced, the sound engineer creates a stereo 2-track file containing all the mixed tracks together. These are either recorded by the analog mixer in a computer or “packed” into a digital audio file. Once all the tracks have hit, the next phase will be mastered.


This is the final stage in music mixing & recording, that is, audio production and includes a mastering engineer. The Mastering Engineer will make final fine adjustments to the mixes to create a “holistic” sound. This applies to the levels of the relative titles of a release and also to the sound of the tracks.

He ensures that the frequency response is suitable for the genre and that the music will be well reproduced on all sound systems, such as smartphones, laptops, club sound systems and radio stations. Finally, the Mastering Engineer will transfer the audio to a pre-master format while performing quality control. This ensures that all copies of the duplicator come out perfectly.

With the above in mind, here are tips for mixing music that you can consider when mixing & recording music.

Write and record before you mix

Before you start mixing, make sure the entire track has been recorded. This is the number one rule for music mixing & recording. You cannot start mixing a line before it’s done, because that would be like trying to decorate the inside of a house when the roof is not on. If you mix a track before it’s done, it will never be finished, because when you write, you have to consider certain things, and when mixing, you think about other things.

These two contradictory priorities will pull you right and left. If you do, you have a good chance of using effects to mask a badly written song, or you need to learn and understand some basic music theory in order to pave the way for a solid path forward. It’s worth noting that you might need some extra music mixing & recording tips if you have these issues when you have a finished track

Always fix issues with what was recorded at the time of recording

If you record something or have received a trace from someone and you hear that there is a problem somewhere in the track, it is

very important that this issue is resolved before you start mixing. It is important to set solid and clear boundaries between mixing & recording, this is one of the golden rules at the top of the music mixing & recording dashboard. If you’ve just recorded a guitar part and something is not sitting properly, maybe a short puff or something out of time, fix it right away. Either choose a note that does not collide or re-record around the specific bar or between the rest that works. Do not leave it to the mix.

Arrange your environment before you start

Before you sit down and begin to do the mixing & recording of a trail, it is important that you reach all your arms and make sure you have everything nearby. This may not be one of the most helpful music mixing & recording techniques, but it is important for concentration. It’s not good if you get up all the time and go through cabinets looking for specific boxes or something, just to find out you do not have the right cable or batteries.

Certainly, using the above tips, you will be in a position to enjoy a perfect music mixing & recording process.